Supplied Accessories; Quick Reference; Attaching The Stand - Sharp Aquos LC-40LE700UN Operation Manual

Supplied Accessories

Make sure the following accessories are provided with the product.
Remote control unit "AAA" size battery
( g 1)
Page 7
• Always use the AC cord supplied with the TV.
• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available
directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for ordering, or
VISIT www.sharpusa.com/SharpDirect.

QUICK REFERENCE

Attaching the Stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 Confi rm that there are 12 screws (all the same size)
supplied with the stand unit.
1
2 Set the post for the stand unit onto the box.
2
Attach the base to the post.
3
Insert and tighten the 8 screws into the 8 holes
on the bottom of the base.
• Hold the stand unit securely with one hand, and then
tighten the screws.
3
1
6
AC cord
( g 2) ( g 1)
Page 8 Page 7
Screws
3
2
1
FRONT
Cable clamp Stand unit
( g 1)
Page 7
1
3 Insert the stand into the openings on the bottom
of the TV.
2
Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
Screws
2
Soft cushion
• To detach the stand, perform the steps in reverse order.
Operation manual
( g 1) ( g 1)
Page 6
2
1
1