Watching Tv; Turning On/Off The Power; Initial Installation - Sharp Aquos LC-60LE745U Operation Manual

Watching TV

Turning On/Off the Power

POWER
POWER (On/Standby)
Press POWER on the TV or on the remote control unit
to turn the power on.
• The Initial Installation starts when the TV powers on for the
fi rst time. If the TV has been turned on before, the Initial
Installation will not be invoked. For changing the settings of
the Initial Installation, perform "EZ setup" on the Initial Setup
menu on page 36.
Press POWER on the TV or on the remote control unit
again to turn the power off.
• The TV enters standby and the image on the screen
disappears.
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is
turned off.

Initial Installation

When you turn on the TV for the fi rst time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press POWER on the
remote control unit.
1. Insert the batteries into the remote control unit. (See page 11.)
2. Connect the antenna cable to the TV. (See page 11.)
3. Plug in the AC cord to the AC outlet. (See page 10.)
Language (Language setting)
Select from among 3 languages: English, French and
Spanish.
Press a / b to select the desired language listed
1
on the screen, and then press ENTER.
Language
Location & Time
TV Location
Antenna & Cable/STB
Air/Cable
CH Search
Network
Completed
Location & Time
Make settings for the country, area and time zone
where you use the TV.
Press a / b to select "United States", "Canada" or
2
"Mexico", and then press ENTER.
United States
English
Français
Español
Canada
Mexico
19