Check Mmc Files And Storage Space; Communications Port Configuration - Eagle IntelliMap 642c iGPS Installation And Operation Instructions Manual

satisfied with the distance setting. If you want to enable the other
alarms, repeat steps 2 and 3.
4. Press repeatedly to get back to the main page display.
EXIT
IMPORTANT ALARM NOTES:
Anchor Alarm - The anchor alarm may be triggered even when you
are sitting still. This usually happens when using small — less than
.05 mile — anchor alarm ranges.
Arrival Alarm - If the arrival alarm distance is set to a small num-
ber, the unit may not show navigation data to the next waypoint af-
ter you arrive at the first one. That occurs when you are not able to
come close enough to the first waypoint to trip the arrival alarm.

Check MMC Files and Storage Space

To check MMC Files:
Press |
MENU MENU
| to see the free space on the card.
I ENT
NFO

Communications Port Configuration

This unit has one NMEA 0183 version 2.0 compatible communication
port. The Com Port Menu, accessed from the System Setup Menu, al-
lows you to configure the communications port to send or receive data
to another electronic device. The com port can be used for NMEA or
SiRF Binary data transfer.
To set Com Port Configuration:
1. Press
MENU
2. Press ↓ to
C
|↓ to
B
ROWSE
Main Menu (left). MMC File Browser (right).
| |↓ to
MENU S
OMMUNICATIONS
MMC F
ILES
|
S ENT
YSTEM ETUP
| .
P ENT
ORT
68
. Press ↓ to
|
ENT
.
MMC C
ARD