Dyson DC14 Owner's Manual page 13

A10480_DC14_USA_OWNER_MAN.q... p1 6/3/04
Changing/fitting the
belt
CAUTION
• Ensure soleplate is in
correct position before
use.
E Use back of cleaner as
lever, loop belt around
thumb. Turn the belt 90
degrees, stretch and
release over spindle.
Belt must be free of twists
as shown.
1:12 PM Page 13
E
F Rest the three tabs on
inside of yellow bumper
strip and secure soleplate
back into position.
G Ensure soleplate is in
correct position before
use.
Optional:
maintaining the Upholstery tool
A C
B D
E
Optional: Upholstery tool C To reassemble, match the
arrows on the brushbar to
A Release catches and
the arrows on central
remove the soleplate.
support.
B Remove both brushbars
D Align front of soleplate
and clear away thread
with front of tool and
and hair.
secure all 3 catches.
E Ensure slider is set as
shown.
16