Changing/Fitting Belt - Dyson DC14 Owner's Manual

A10480_DC14_USA_OWNER_MAN.q... p1 6/3/04
Changing/fitting the
belt
CAUTION
• Turn power off, unplug
machine and allow
machine to cool for 1
hour before changing/
fitting belt. Failure to do
so could result in electric
shock or personal injury.
• Ensure soleplate is in
correct position before
use.
• Make sure all parts have
been replaced securely
before using your
machine.
Dyson Helpline contact us at
16
1:12 PM Page 12
Remove wand and turn A Undo fasteners using a
machine upside down. coin, slide back end caps
and remove soleplate.
1 - 866 - 693 - 9766
A
B
B Remove dirt or debris and
check spindle is clean.
C
D
C To replace the belt,
remove the brushbar, loop
belt around brushbar and
feed through hole.
D Check end caps are in
place.