Philips DS9800W/37 User Manual page 24

7 Update
firmware
To improve the performance of DS9800W,
of your DS9800W.
Please register your product at www.philips.
com/welcome for information about the latest
Note
www.philips.com/support
1
On your PC/Mac, go to www.philips.com/
support.
2
3
24 EN
XXXX
XXXX. zip
Update from the
Warning
Note
on your PC/Mac, remember to go to the Wi-Fi router
your DS9800W. See the user manual of your Wi-Fi
connected to the Wi-Fi router.
1
Power on DS9800W (see 'Prepare' on
page 11).
» It takes about 35 seconds for the unit
to boot up. During boot-up, the LED
indicator on the back of the main
speaker blinks green quickly.
»
and the LED indicator turns to green
steadily. DS9800W is connected to
automatically.
2
Make sure that DS9800W and your PC/
Mac are connected to the same Wi-Fi
router.
3
Safari on your PC/Mac, then
select 'Philips_Fidelio XXX' from the
Bonjour pull-down list.
Or open another Internet browser
on your PC/Mac, then type in the IP
address of DS9800W (available on the
address bar.
»
page is displayed.
4
Select the Firmware Update tab, then
follow the on-screen instruction to