Panasonic HX-WA2A Owner's Manual page 102

[FACE CHASER]
The detected face is displayed in the frame.
# [FACE CHASER] # [
[MENU]:
3
∫ About prioritized face framing
The prioritized face frame is displayed in
yellow. When the unit is set to Portrait mode
in Intelligent Auto Mode, the unit will focus
on the prioritized face frame and adjust the
brightness accordingly.
≥ The gray frames are for face detection only.
≥ When you press the
the unit focuses on the prioritized frame. When focus is achieved, the
prioritized frame turns green.
≥ A maximum of 15 frames are detected, with the frames near the center
of the screen and large frames being prioritized.
≥ For still pictures with detected faces,
thumbnail display. (l 66)
≥ If the subject is small or dark on the LCD monitor, the unit may not be
able to detect it.
≥ [SCENE MODE] will be automatically set to
[FACE CHASER] is set to
is set to (FIREWORKS),
SCENERY).
≥ [FOCUS MODE] (l 98) is set to
[METERING MODE] (l 98) is set to
≥ Face detection is disabled when using burst recording or panorama
still picture recording.
≥ When [FOCUS] (l 112) is set to
disabled.
≥ When it is set to [ISO] (l 100) or [EXP COMPENSATION] (l 106),
the brightness may not be adjusted.
≥
HX-WA20
When [FACE CHASER] is set to
set to off.
≥
HX-WA20
When [EXPOSURE] (l 110) is set to
(APERTURE) or
102
VQT4F46
button halfway while recording still pictures,
(ON) while the [SCENE MODE] (l 90)
(LANDSCAPE), or
(9-PT AUTOFOCUS) and
(ON), Slow Motion Mode (l 81) is
(MANUAL), the brightness is not adjusted.
(ON)]
is displayed on the 1-file
(OFF) when the
(MULTI).
(MANUAL), Auto focus is
(SHUTTER),
(NIGHT