Table of Contents
Advertisement
2.4 Adjusting volume
Ringer volume
While the unit is idle, press {A} or {B}.
L If any documents are in the document entrance, you
cannot adjust the volume. Confirm that there are no
documents in the entrance.
To turn the ringer OFF
1. Press {B} repeatedly to display "RINGER OFF=
OK?".
2. Press {Set}.
L When a call is received, the unit will not ring and
will display "INCOMING CALL".
L To turn the ringer back ON, press {A}.
Ringer type
L You can select one of three ringer types (feature #17
on page 42).
Handset receiver volume
While using the handset, press {A} or {B}.
Monitor volume
While using the monitor, press {A} or {B}.
Initial Programming
{Set}
{A}{B}
For assistance, please visit http://www.panasonic.com/help
2.5 Date and time
You must set the date and time.
1
Press {Menu}.
2
Press {#}, then {0}{1}.
3
Press {Set}.
L The cursor (|) will appear on the display.
4
Enter the current month/date/year by selecting 2
digits for each.
Example: August 3, 2010
Press {0}{8} {0}{3} {1}{0}.
5
Enter the current hour/minute by selecting 2 digits for
each. Press {*} repeatedly to select "AM" or "PM".
Example: 3:15PM (12 hour clock entry)
1. Press {0}{3} {1}{5}.
2. Press {*} repeatedly to display "PM".
6
Press {Set}.
7
Press {Menu} to exit.
2. Preparation
{Set}
{<}{>}
{Menu}
SYSTEM SETUP
PRESS [( )]
SET DATE & TIME
PRESS SET
M:|
0 1/D:01/Y:10
TIME: 12:00AM
M:08/D:03/Y:10
TIME:
1 2:00AM
|
M:|
0 8/D:03/Y:10
TIME: 03:15AM
M:|
0 8/D:03/Y:10
TIME: 03:15PM
SETUP ITEM [
]
21
Hide quick links:
Advertisement
Table of Contents
