Open
Hook
Be sure to attach the provided ferrite core to the HDMI cable/USB cable (not supplied) to reduce interference or electrical
noise.
Attach the ferrite core as close as
possible to connector on the TV side as
shown.
(example: USB connecter)
Power cord connection
To attach
Insert it firmly until the
tabs on both sides click
into place.
Installing the remote's batteries
Note the correct polarity
(+ or -).
Attaching Ferrite Core
Close the ferrite core until it clicks.
To remove
Caution
Incorrect installation may cause
Close
battery leakage and corrosion,
resulting in damage to the remote
control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or break batteries.
Keep pushing both
sides until they snap
and pull.
9