Digital Audio Out Terminal; Closed Caption (Cc); Input Signal That Can Be Displayed; 4:3 Side Bars - Panasonic VIERA TC-P50X5 Owner's Manual

42”/50” class 720p plasma hdtv (41.9/49.9 inches measured diagonally)
Hide thumbs Also See for VIERA TC-P50X5:
Table of Contents

Advertisement

You can enjoy your Home theater by connecting a Dolby Digital (5.1 channel) decoder and "Multi Channel" amplifier to the
DIGITAL AUDIO OUT terminals.
Caution
Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output.
When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC
channel is selected, the output will be PCM.
When playing a movie on SD Card Movie player, when the sound has been recorded in Dolby Digital, the output from the
DIGITAL AUDIO OUT terminal will be Dolby Digital. When the sound is recorded in other formats, the output will be PCM.
For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3;
characters might be cut off).
The CC can be displayed on the TV only when the receiver (such as a Cable box or satellite receiver) has the CC set
to ON within the device itself. Check with your Cable or Satellite provider for instructions. The TV's CC button does not
operate the Satellite or Cable box's CC function.
If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC
may overlap on the TV.
If a digital program is being output in analog format, the CC data will also be output in analog format.
If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor.
Do not display a picture in 4:3 mode for an extended period, as this can cause
"Image retention" to remain on either or both sides of the display field.
To reduce the risk of such "Image retention", change the brightness of the side
bars.
See page 26 for more information
The side bar may flash (alternate black/white) depending on the picture.
Applicable input signal for Component (Y, P
525 (480)/60i
525 (480)/60p
750 (720)/60p
1,125 (1,080)/60i
1,125 (1,080)/60p
1,125 (1,080)/60p
1,125 (1,080)/24p*
1,125 (1,080)/24p*
Note
Signals other than those shown above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we
disclaim any liability or damage arising from operation and/or performance from usage of such other maker's peripheral
devices.
32

DIGITAL AUDIO OUT terminal

Closed Caption (CC)

4:3 side bars

Input signal that can be displayed

, P
), HDMI
B
R
horizontal frequency (kHz)
15.73
31.47
45.00
33.75
67.43
67.50
26.97
27.00
Side Bar
Image retention
4:3
Screen
Display
vertical frequency (Hz)
59.94
59.94
59.94
59.94
59.94
60.00
23.98
24.00
(* HDMI only)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viera tc-p42x5

Table of Contents