Watching Content From External Devices - Panasonic Viera TC-P50U50 Owner's Manual

Set Sleep Timer
The TV automatically goes into Standby after the selected period.
■
Press SLEEP repeatedly until the desired time appears.
SLEEP
• Off/15/30/60/90 (minutes)

Watching content from external devices

With the connected equipment turned On
Display the Input select menu
Select the input mode
Input select
ANT/Cable In
1
HDMI 1
2
HDMI 2
3
Comp./Video
4
HDMI 1
GAME
Operate the connected equipment directly or use the remote control
supplied with the equipment
Note
●
For details, see the manual for the connected equipment.
16
• It is also possible to set the time from "Sleep Timer" in the "Timer" menu
• To cancel, set to "Off" or turn off the TV.
30
• To display the remaining time Information banner (p. 14)
• When the remaining time is within 3 minutes, the remaining time will be
Not used
GAME
or
(example)
Input label
Terminal
Set ANT/Cable in (p. 27)
Label
Enable Inputs
Edit labels
(example)
Input labels
(Press MENU -> Setup -> Input labels)
Note
(p. 29).
displayed on screen.
You can also press the corresponding NUMBER
button or press INPUT repeatedly to cycle through
the available inputs. If you are unsure which input to
select, wait 2 seconds between each selection.
●
For your convenience, your can edit the
select
inputs with labels that are easy to remember.
●
During the selection, if no action is taken for
several seconds, the "Input select" menu
enter
disappears.