Cycle Guide - Maytag MGDX5SPAW Use And Care Manual

CYCLE GUIDE — AUTO CICLOS (AUTO CYCLES)
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
AUTO CICLOS (Auto Cycle) - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness
level. Gives the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.
Depending on model, temperature may be selected on cycle knob or be a separate control.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes,
medium weight
fabrics, sheets
Control de arrugas
Casual, shirts,
(Wrinkle Control)
pants, lightweight
items
CYCLE GUIDE — CICLOS MANUALES (TIMED CYCLES)
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
CICLO MANUAL (Timed Cycle) - Will run the dryer for the specified time on the control. Depending on model, temperature may
be selected on cycle knob or be a separate control.
Items to dry: Cycle:
Ciclos
Any load
manuales
(Timed cycles)
Rubber, plastic, heat Ciclos
sensitive fabrics manuales
(Timed cycles)
Setting the Drying Temperature
If your dryer has multiple heat settings:
An Alta (High) heat setting may be used for drying heavyweight
items such as towels and work clothes.
A (Baja) Low to Media (Medium) heat setting may be used for
drying medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
6
Default
Cycle:
Time:
Pesado N/A
(Heavy)
Normal N/A
N/A
Drying
Temperature:
Any
Sólo aire
(Air only)
Available Options:
Temperatura (Temperature)
Protección anti arrugas (Wrinkle Prevent)
Temperatura (Temperature)
Protección anti arrugas (Wrinkle Prevent)
Temperatura (Temperature)
Protección anti arrugas (Wrinkle Prevent)
Available
Options:
Temperatura
(Temperature)
Protección anti arrugas
(Wrinkle Prevent)
Temperatura
(Temperature)
Protección anti arrugas
(Wrinkle Prevent)
Use a Sólo aire (Air only) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.
Cycle Details:
Gives the best drying in the shortest time.
Drying time varies based on fabric type,
load size, and dryness setting.
Select a drying temperature based on the
fabrics in your load. If you are unsure of
the temperature to select for a load, select
the lower setting rather than the higher
setting.
Cycle Details:
Dries items to a damp level for items that do not
require an entire drying cycle.
Select a drying temperature based on the fabrics in
your load. If you are unsure of the temperature to
select for a load, select the lower setting rather than
the higher setting.
Use a Sólo aire (Air only) setting for foam, rubber,
plastic, or heat-sensitive fabrics.