Demo; Radio Operations; Listening To The Radio; Presetting The Radio Stations - LG FA166DAB Owner's Manual

14 Operating

DEMO

In the power off state, it demonstrates the function
on display window by pressing DEMO. To cancel
the DEMO, press it again.
,
Note
 While DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
 You can enjoy other functions during
the DEMO. Then the DEMO will pause to
temporary.
- Without input key in 10 sec, the DEMO
will play back automatically.
3

Radio Operations

Be sure that FM aerial is connected.
(Refer to the page 12)

Listening to the radio

1. Press F (FUNCTION) until FM appears in the
display window.
The last received station is tuned in.
2. Press and hold TUNING -/+ for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Press TUNING -/+ repeatedly.
- In DAB function, press d/M to start.
3. Adjust the volume by pressing -/+ on the unit
or by pressing VOL +/- on the remote control
repeatedly.

Presetting the Radio Stations

You can preset 50 stations for FM .
Before tuning, make sure to turn down the volume.
1. Press F (FUNCTION) until FM appears in the
display window.
2. Select the desired frequency by pressing
TUNING -/+.
- In DAB function, press d/M to start.
3. Press PROGRAM/MEMO. a preset number will
fl ash in the display window.
4. Press FOLDER · PRESET w/s to select the
preset number you want.
5. Press PROGRAM/MEMO. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
Or
7. To listen a preset station, press
FOLDER · PRESET w/s.

Deleting all the saved stations

1. Press and hold PROGRAM/MEMO. for two
seconds. "ERASE ALL" will fl ash up on the unit
display.
2. Press PROGRAM/MEMO. to erase all saved
radio stations.

Improving poor FM reception

Press d/M on the unit or d/M on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about
the radio station being listened to. Press RDS
repeatedly to cycle through the various data types. :
PS (Programme Service Name)
The name of the channel will appear in
the display
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
RT (Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT (Time controlled by the channel)
This shows the time and date as
broadcast by the station.
You can search the radio stations by programme
type by pressing RDS. The display will show the last
PTY in use. Press PTY one or more times to select
your preferred programme type. Press and hold
C/V. The tuner will search automatically.
When a station is found the search will stop.