Basic Operations
CD/ USB Operations
1. Insert the disc by pressing B (OPEN/CLOSE) or
connect the USB device to the USB port.
2. Select the CD or USB function by pressing
F (FUNCTION) on the remote control or FUNC.
on the unit.
3. Select a fi le (or track) you want to play by
pressing C/V.
To
Stop
Press Z ENTER
Playback
Press d/M
Pause
Press d/M
During playback, press C/V
to go to the next track/ fi le or to
Skipping to
return to the beginning of the
the next/
current track/ fi le.
previous
track/ fi le
Press C twice briefl y to step
back to the previous track/ fi le.
Searching
Press and hold C/V during
for a section
playback and release it at the point
within a track
you want to listen to.
Searching
Press FOLDER · PRESET w/s and
for a section
then d/M.
within a folder
Press REPEAT on the remote
Playing
control repeatedly, the display
repeatedly or
change in the following order,
randomly
RPT1 -> RPT DIR (only MP3/ WMA)
-> RPT ALL -> RANDOM -> OFF
Other Operations
Programmed Playback
The program function enables you to store your
favorite fi les from any disc or USB device.
A program can contain 20 tracks.
1. Insert a CD or USB and wait for it to be order.
2. Press PROGRAM/MEMO. on the remote control
3. Press C/V on the unit or on the remote
Do this
4. Press PROGRAM/MEMO. again to save and
5. Press d/M to play the programmed music fi les.
6. To clear your selection, press Z ENTER,
Displaying fi le information
(ID3 TAG)
While playing an MP3 fi le containing fi le
information, you can display the information by
pressing INFO.
Turn off the sound temporarily
Press @ (MUTE) to mute your unit.
You can mute your unit, for example, to answer
the telephone, the "q" is displayed in the display
window.
in stop status.
control in stop satus.
select a next track.
PROGRAM/MEMO. and then Z ENTER.
,
Note
The programs are also cleared when the disc
or USB device is removed, the unit is powered
off or the function is switched to others.
Operating
13
3