Location Requirements - LG LW1512ER Owner's Manual

Parts supplied:
Check that all parts are included in parts package.
A
B
D
C
E
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed here.
Tools needed
Phillips head screwdriver
Flat-blade screwdriver
Scissors
Level

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Make sure you have everything necessary for correct installation.
The location should provide:
Grounded electrical outlet within 4 ft (122 cm) of where the
power cord exits the air conditioner.
NOTE: Do not use an extension cord.
Free movement of air in room to be cooled.
A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.
Adequate wall support for weight of air conditioner. Air
conditioner weighs 100 lbs to 130 lbs (45.4 kg to 59.0 kg).
NOTE: Cabinet louvers must not be obstructed. Air must be able
to pass freely through the cabinet louvers.
G H
I
F
Tape measure
Cordless drill and 1/8" bit
Pencil
Pliers
A. Top rail
B. Foam seal
C. Installation brackets (left and right)
D. Window lock bracket
E. 14500-18000 BTU:
24000 BTU:
"
F. bracket screws (6)
G. 14500-18000 BTU:
24000 BTU:
I. Left and right side curtains
J. Remote control
J
Socket wrench and sockets
Adjustable wrench
A. Cabinet louvers
"
screws (12)
"
screws (10)
"
screws (8)
"
screws (10)
locknut(2)
A