20
Using the PROJECTOR
Using Additional Options
Adjusting Aspect Ratio
Resize an image to view at its optimal
size by pressing RATIO while you are
using the projector.
NOTE
y Some options may not be available
y
depending on input signals.
y You can also change the image size
y
by pressing Q.MENU or SETTINGS.
-
FULL: Changes to the full screen
regardless of the aspect ratio.
-
16:9: Resizes images to fit the
screen width.
-
Just Scan: Displays video images in
the original size without cutting off
the edges.
NOTE
y If you select Just Scan, you may see
y
image noises at the edge or edges
of the screen.
-
Set By Program: Displays images in
the same aspect ratio as the original
image.
-
4:3: Resizes images to the 4:3
aspect ratio.
-
Zoom: Enlarges an image to fit the
screen width. The top and bottom of
the image may be truncated.
y Press the ︿ or ﹀ button to zoom in
y
or out of the image.
y Press the ︿ or ﹀ button to move
y
the image.
-
Cinema Zoom: Formats an image
to the cinemascope ratio, 2.35:1. It
ranges from 1 to 16.
y Press the ︿ or ﹀ button to zoom in
y
or out of the image.
y Press the ︿ or ﹀ button to move
y
the image.
NOTE
y If you enlarge or reduce an image,
y
the image may be distorted.