Garmin GET 10, Engine Tilt Adapter Installation and Configuration Installation And Configuration Manual

GET 10 Installation and Configuration Instructions
™
Use the Garmin GET 10 adapter to adapt analog information provided by an engine-tilt sensor
®
on your boat to your NMEA 2000
engine-tilt information on compatible Garmin display devices connected to your NMEA 2000
network. For a list of compatible Garmin chartplotters and devices, visit www.garmin.com.
Compare the contents of this package with the packing list on the box. If any pieces are
missing, contact your Garmin dealer immediately.

Product Registration

Help us better support you by completing our online registration today. Go to
.com. Keep the original sales receipt, or a photocopy, in a safe place.

Contact Garmin

Contact Garmin Product Support if you have any questions while using your GET 10. In the
USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or
(800) 800.1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to www.garmin.com/support
information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.
See the Important Safety and Product Information guide in the compatible Garmin display device box for
product warnings and other important information..
Caution: Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or
sanding.
notiCe: When drilling or cutting, always check the opposite side of the drilling or cutting
surface.
Needed Tools and Supplies
• Heat-shrink tubing and a heat gun
• Cable ties
• Additional NMEA 2000 cabling and connectors (optional)
July 2009
network. Your GET 10 adapter allows you to observe
®
and click
190-01081-05 Rev. A
Contact Support
for in-country support
http://my.garmin
Printed in Taiwan