Using The Remote Control; Viewing 3D Images - Epson PowerLite Home Cinema 5010 Quick Setup

5
Turn the focus ring to sharpen the image.
6
Your projector automatically adjusts images that look like
but if necessary you can press the or buttons on the projector to
correct this.
Note: When setting up the projector, make sure that it is placed level
to the screen in order to provide the best possible image quality. If you
must set up the projector at an angle, use the vertical keystone correction
buttons to correct the image shape.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector on
Switch between
2D and 3D
Access projector
menus
For more information on using the remote control, see the online User's Guide.
or ,
Turn projector off
Choose which source
to display
Navigate projector
menus
Turn off projector
display
Project wirelessly
(PowerLite Home Cinema 5010e only)
Follow these steps to use the included WirelessHD Transmitter (PowerLite
Home Cinema 5010e only) to wirelessly transmit HD content to your projector.
1
Place the transmitter within 30 feet (10 m) of the projector. Make sure
the front of the transmitter faces the front of the projector. See the
online User's Guide for more information on the WirelessHD transmission
range.
Note: Do not place the transmitter on a metal surface, as this may
interfere with the signal.
2
Plug the AC adapter into the transmitter and a wall outlet.
3
Connect an HDMI cable to your video device and the HDMI port on the
side of the transmitter.
4
Turn on the power switch on the back of the transmitter.
5
Turn on your video device and begin playback.
6
Turn on the projector.
7
Press the button on the projector remote control.
See the online User's Guide for more information on adjusting and configuring
the WirelessHD connection.

Viewing 3D images

To view 3D content, you must first connect a 3D-compatible video device to
one of the HDMI ports on your projector. You will also need a pair of Epson or
Epson-compatible 3D active shutter glasses.
1
Turn on and begin playback on the 3D-compatible video device.
2
Press the button on the projector remote control, if necessary.
3
Press and hold the power button on your 3D glasses for at least one
second.
See the online User's Guide for more information on adjusting 3D images.