Connecting A Usb Device Or Camera To The Projector; Selecting The Connected Usb Source - Epson PowerLite Home Cinema 500 User Manual

Parent topic:
Related topics
Projecting a Slide Show

Connecting a USB Device or Camera to the Projector

You can connect your USB device or camera to the projector's USB TypeA port and use it to project
images and other content.
1. If your USB device came with a power adapter, plug the device into an electrical outlet.
2. Connect the USB cable (or USB flash drive or USB memory card reader) into the projector's USB
TypeA port shown here.
Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not
operate correctly.
3. Connect the other end of the cable (if applicable) to your device.
Parent topic:
Related topics
Projecting a Slide Show

Selecting the Connected USB Source

You can switch the projector's display to the source you connected to a USB TypeA port.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the USB button on the remote control.
3. Press the button again to cycle through other USB sources, if available.
Parent topic:
Connecting to External USB Devices
Connecting to External USB Devices
Connecting to External USB Devices
32