Viewing Wirelesshd Content; Switching Wirelesshd Sources - Epson PowerLite Home Cinema 3020 User Manual

Viewing WirelessHD Content

Follow these steps to view WirelessHD content:
1. Turn on the power switch on the side of the transmitter.
2. Turn on your source device and begin playback.
3. Turn on the projector.
4. Press the
Note: If the WirelessHD connection fails, press the Setup button on the bottom of the
transmitter, then try again.
The light on the transmitter should light up and your projector should now display
WiHD
WirelessHD content. If it doesn't, see "Solving WirelessHD Problems (PowerLite Home
Cinema 3020e Only)" on page 84.

Switching WirelessHD Sources

If you have connected multiple input devices or an output device, follow these steps to switch
sources:
1. Press the
62
Using WirelessHD
button on the remote control.
WirelessHD
button on the remote control or the WirelessHD Transmitter.
Input
Remote control WirelessHD Transmitter