Entering A Password To Use The Projector - Epson BrightLink 425Wi User Manual

Entering a Password to Use the Projector

If a password is set up and a Power On Protect password is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.
1. Hold down the Num button on the remote control while you enter the password using the numeric
buttons.
The password screen closes.
2. If the password is incorrect, the following may happen:
• You see a "wrong password" message and a prompt to try again. Enter the correct password to
proceed.
98