Electrical Requirements; Computer Requirements; Tools And Supplies - Epson Stylus Pro GS6000 Pre-Installation Guide Installation Manual

Choose a location for the printer that meets these requirements:
Temperature
Humidity
(without condensation)

Electrical Requirements

You will need three electrical outlets to plug in the printer,
heater, and take-up roller (do not use a power strip). It is
recommended that the outlets be powered by a dedicated
30-amp circuit. Typical power consumption while printing
is about 680 watts. Make sure your electrical system meets
the requirements shown to the right.

Computer Requirements

Make sure your computers meet these requirements for using the ColorBurst
Server Workstation:
®
Windows Vista
•
Windows ® XP (32-bit)*
2.8 GHz Intel ®
•
4GB memory recommended
•
We recommend that you use a Cat 6 Ethernet cable and connect the printer through your network, instead of using USB.

Tools and Supplies

You'll need the following tools and supplies:
No. 2 (medium) Phillips screwdriver
•
Required to assemble the stand.
Lifting bars (optional)
•
Two 5-foot lengths of 1-inch steel pipe (available at hardware stores) will make it easier to lift the printer onto its stand.
Caution: The printer without its stand weighs 330 lb (150 kg). Six or more people are required to lift and guide it onto the stand.
Metric ruler
•
You'll need a steel ruler with divisions in millimeters (at least 500 mm long, or one-half meter) to perform the line feed
adjustment. For more information, see Chapter 2 in the Setup and Use Guide.
Printable media
•
You'll need a supply of media to perform certain adjustments. We recommend using adhesive-backed vinyl, available
from companies such as 3M, Avery, or Epson.
You may also need a box cutter to unpack the printer and to cut media, a loupe to read alignment patterns, and a
spectrophotometer to linearize your color output.
Epson and Epson Stylus are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
Other product names are the property of their respective owners.
© 2008 Epson America, Inc. 10/08
Operation
68 to 90 °F (20 to 32 °C)
40 to 60% RH
(recommended) or
Core ™ 2 Duo or better
Storage
14 to 104 °F (–10 to 40 °C)
(4 days at 90 °F [32 °C])
20 to 80% RH
(stored in shipping container)
Specification
Voltage
Frequency
Current
® RIP:
Client Workstation(s):
®
Mac OS X 10.4.11 or higher
•
Windows Vista or Windows XP (32- or 64-bit)*
•
* Windows XP "Classic Mode" may not be used.
Description
110 to 120 V
50 to 60 Hz
23.5 A
CPD-26539