High Temperature Alarm - Electrolux ENF4453AOX User Manual

www.electrolux.com
8
At the end of the countdown the DrinksChill
indicator flashes and an audible alarm
sounds:
1. Remove any drinks contained in the
freezer compartment.
2. Press the DrinkChill button to switch
off the sound and terminate the func-
tion.
It is possible to deactivate the function at
any time during the countdown:
1.
Press the DrinkChill button.
2. The DrinksChill indicator goes off.
It is possible to change the time during the
countdown and at the end by pressing the
Temperature colder button and the Tem-
perature warmer button.
SHOPPINGMODE
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the ShoppingMode to chill the products
more rapidly and to avoid warming the oth-
er food which is already in the refrigerator.
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears.
The ShoppingMode indicator flashes
for few seconds.
The ShoppingMode shuts off automatically
after approximately 6 hours.
To switch off the function before its auto-
matic end:
1.
Press the Mode button until the Shop-
pingMode indicator flashes.
2. The ShoppingMode indicator goes off.
The function switches off by select-
ing a different fridge set tempera-
ture.
FASTFREEZE MODE
To switch on the function:
1. Select the freezer compartment.
2. Press the Mode button until the corre-
sponding icon appears.
The FastFreeze indicator flashes for
few seconds.
This function stops automatically after 52
hours.
To switch off the function before its auto-
matic end:
1. Select the freezer compartment.
2.
Press the Mode button until the Fast-
Freeze indicator flashes.
3. The FastFreeze indicator goes off.
The function switches off by select-
ing a different freezer set tempera-
ture.

HIGH TEMPERATURE ALARM

An increase in the temperature in the freez-
er compartment (for example due to a
power failure) is indicated by:
• flashing the alarm and freezer tempera-
ture indicators
• sounding of buzzer.
To reset the alarm:
1.
Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator
shows the highest temperature
reached for a few seconds. Then show
again the set temperature.
4.
The alarm indicator continue to flash
until the normal conditions are re-
stored.
When the alarm has returned the alarm in-
dicator goes off.