Canon PowerShot G15 User Manual page 115

• Even if your face is not detected after you join the others in the shooting
area, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (= 8 8) is only available for the final shot.
Special Modes for Other Purposes
3
Press the shutter button all the
way down.
X X The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
X X The lamp blinks and the self-timer sound
is played.
4
Join the subjects in the
shooting area and look at the
camera.
X X After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
z z To cancel shooting after you have
triggered the self-timer, press the
<n> button.
115