Shooting with Color Accent
Choose a single image color to keep and change other colors to black and
white.
Recorded Color
•
Using the flash in this mode may cause unexpected results.
•
In some shooting scenes, images may look grainy and colors may
not look as expected.
Still Images
1
Choose [T].
z
z
Follow steps 1 – 2 on = 9 9 and
choose [T].
2
Access the setting screen.
z
z
Press the <
The original image and the Color Accent
X
X
image are displayed one after another.
X
X
By default, green is the color that will be
kept.
3
Specify the color.
z
z
Position the center frame over the color
to keep, and then press the <q> button.
The specified color is recorded.
X
X
4
Specify the range of colors to
keep.
z
z
Press the <o><p> buttons or turn the
<7> dial to adjust the range.
z
z
To keep only your specified color, choose
a large negative value. To keep colors
similar to your specified color as well,
choose a large positive value.
z
z
Press the <
shooting screen.
5
Shoot.
Image Effects (Creative Filters)
> button.
> button to return to the
Movies
109