Selecting The Lan Type; Wireless Lan - Canon Wireless Transmitter WFT-E6A Instruction Manual

Selecting the Communication Method and LAN Type

Selecting the LAN Type

For [LinkedShot] instructions, refer to page 65. Note that no information about
[LinkedShot] is given in this chapter.

Wireless LAN

Wired LAN
With this option, a wired LAN connection is established using the Ethernet RJ-45 terminal on
the EOS-1D X. For details, refer to the Wired LAN Instruction Manual included with the EOS-1D
X.
18
Turn the <5> dial to select the type of LAN, and
then press <0>.
Select [OK] and press <0> to go to the next
screen.
The [Wireless LAN setup method] screen is
displayed.
[Connect with wizard]: See p.19
[WPS (PBC mode)]: See p.21
[WPS (PIN mode)]: See p.22
Select [WPS (PBC mode)] or [WPS (PIN mode)]
when using a wireless LAN terminal compatible with
Wi-Fi Protected Setup (WPS).