Turning On Your Tv For The First Time - Dynex DX-LDVD22-10A User Manual

10
3 Connect an audio cable to the AUDIO OUT jack on the computer,
then connect the other end of the cable to the PC AUDIO IN jack
on the back of your TV.
Note: The audio cable should have a stereo mini plug.
To play video from a computer:
1 Turn on your TV, then press INPUT to select VGA.
2 Turn on the computer, then check the image on your TV. There
may be noise associated with the resolution, vertical pattern,
contrast, or brightness in VGA mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to
another rate, or adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the PC graphic card
can not be changed, change the PC graphic card or consult the
manufacturer of the PC graphic card.
Mode Resolution
VGA 640x480
SVGA 800x600
XGA 1024x768 48.4
1280x720 45
1280x768 47.45
1360x768 47.7
Note: All above listed are subject to VESA criteria.
Turning on your TV for the first
time
To turn on and configure your TV:
1 Make sure that you have inserted the batteries in the remote
control, connected the antenna to the TV, and connected the AC
power.
2 Press POWER , then wait several seconds. The power indicator
LED turns blue and the TV turns on.
3 Select the signal source for your TV.
• Press INPUT to open the signal source menu, then press
CH+ or CH- to select the source. Options include:
• TV
• Composite
• S-Video
• Component
• DVD
• VGA
• HDMI
• Press ENTER/VOL+ to confirm.
4 Select the TV signal source for your TV and auto scan for
channels.
• Press MENU, then press VOL+/VOL- to highlight
CHANNELS.
• Press ENTER/VOL+. The Channels menu opens.
Channels
Auto Channels Search
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
CH+
MOVE
VOL VOL ENTER
- +
CH-
Line freq Frame freq
(KHz) (Hz)
31.5 60
37.9 60
60
60
60
60
PICTURE AUDIO CHANNELS SETTINGS
Off
SELECT PREVIOUS EXIT
MENU EXIT

Turning on your TV for the first time

• Press CH+/CH- to highlight Auto Channels Search, then
press ENTER/VOL+ The Auto Channels Search sub-menu
opens.
PICTURE
Channels Auto Channels Search
Choose your TV source
Antenna
Cable
Start
CH+
MOVE ENTER SELECT
VOL VOL
- +
CH-
• Press CH+/CH- to select Antenna or Cable, then press
ENTER. A checkmark appears in the circle next to your
choice.
• Press CH+/CH- to highlight START, then press
ENTER/VOL+. The TV automatically scans and memorizes
all the active, available channels in your area.
5 Set the volume of your TV by pressing VOL+ or VOL-.
6 Set the menu language of your TV.
• Press MENU, then press VOL+/VOL- to highlight SETTINGS.
• Press ENTER/CH-. The Settings menu opens.
PICTURE
Settings
Parental Controls
Closed Caption
Time
Menu Settings
Input Labels
Computer Settings
CH+
VOL VOL MOVE ENTER SELECT
- +
CH-
• Press CH+/CH- to highlight Menu Settings, then press
ENTER/VOL+. The Menu Settings menu opens.
PICTURE
Settings Menu Settings
Transparency 0
Language
CH+
MOVE SELECT
VOL VOL ENTER
- +
CH-
7 Press CH- to highlight Language, then press ENTER/VOL+ to
open the menu.
8 Press CH+/CH- to select the language you want. Options include:
• English
• French
• Spanish
9 Select the channel you want by pressing CH+/CH- to go to the
next or previous channel, or directly by pressing the number
buttons.
AUDIO CHANNELS SETTINGS
0 Analog Channels
0 Digital Channels
MENU PREVIOUS EXIT EXIT
AUDIO CHANNELS SETTINGS
MENU PREVIOUS EXIT EXIT
AUDIO CHANNELS SETTINGS
10
English
MENU PREVIOUS EXIT EXIT