Programmes; Washing; Individual Settings; Switching Off - Bosch WIS28440GB Instructions for Use, Programme Table Operating Instructions Manual

Before using your washing machine for the first time
wash once without any washing.
Sorting and inserting the washing
According to the information on the care labels.
According to type; colour; soiling and temperature.
Do not exceed maximum load.
Follow important instructions.
Do not jam items of washing between the washing machine door and rubber seal.
Add detergent and care product
amount of washing, soiling, water hardness (available from your water utility company) and
For models without insert for liquid detergent:
Pour liquid detergent into corresponding dispenser and place in drum.
Caution when opening the detergent drawer while the appliance is running!
Dilute viscous fabric softener and fabric conditioner with water.
Prevents blockage of the overflow.
Setting programmes
Programme selector
mperature ( = cold)
in speed (* depending on model) or (rinse stop =
spin, the washing remains in the water after the last
ends in ...
progress displays:
se, Spin, programme duration or end (- -)
Page 6
Follow manufacturer's care information!
Page 7
Page 6
Insert large and small items of washing!
Close the washing machine door.
Dose according to:
manufacturer's instructions.
1
Additional functions and option buttons
Individual settings, Page 5
Programme selector for switching
the machine on and off and for
selecting the programme.
Can be rotated in either direction.
If the Option buttons are touched for
longer, the selected options will run
automatically!
2
Select
Start/Pause

Washing

Detergent drawers
with dispensers I, II,
Door
Fascia
Door handle
Drainage hose
Detergent-solution pump
Emergency lock release
Washing
3

Switching off

Turn the programme selector to Off.
Turn off tap
Not required for Aqua-Stop models.
Information, Installation Instructions
Remove the washing
Open washing machine door and remove washing.
If (rinse stop = without final spin) active: Set programme selector
to Drain or Spin. Select Start/Pause.
– Remove any foreign objects – risk of rusting.
– Leave detergent drawer and door open so that residual
water can evaporate.
End of programme when ...
... - - is indicated on the display panel.
Terminating the programme
For programmes at high temperature:
– Cool washing: select Rinse.
– Select Start/Pause.
3 For programmes at low temperature:
– Select Spin or Drain.
– Select Start/Pause.
Change programme if ...
... you have mistakenly selected a wrong programme:
– Reselect programme.
– Select Start/Pause.
The new programme starts from the beginning.
Cancel Programme
– Select Start/Pause.
– If required, top up washing (do not leave door open for a long time –
water from the washing could run out of the open door).
– Select Start/Pause.
4