Selecting The Audio Signal Type; Setting The Clock; Displaying The Information Banner; Displaying The Program Guide - Dynex DX-LCD32-09 User Manual

14
3 Press or to select an option, then press or to adjust the
option. You can adjust:
• Sound Mode—Selects Standard, Music, Movie, or
Personal.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• Balance–Adjusts the balance between the left and right
audio.
• Surround—Turns the surround sound effect on or off.
• AVC—Turns auto volume control on or off. When AVC is on,
the overall volume levels are equalized across all channels.
• SPDIF Type—(Digital programs only) Selects the audio
output mode. RAW outputs the audio in its original format.
PCM outputs the audio in PCM format (if available).
• Audio Language—(Digital programs only) Selects an
alternate audio language if the program has more than one
language.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu system.
Note: You can also press AUDIO to select the Sound Mode.

Selecting the audio signal type

For analog programs, your TV can receive MTS stereo programs and any
SAP (secondary audio program) that comes with a stereo program.
To select the audio signal type:
• Press MTS/SAP one or more times. You can select:
• MONO—Sends the same signal to the left and right audio. If
you are having trouble hearing a stereo broadcast, select this
option.
• STEREO—Sends different signals to the left and right audio.
• SAP—Plays a secondary audio program, if available.
Note: If you are watching a digital program, pressing MTS/SAP selects an
audio track, if available.

Setting the clock

The time is set automatically from a digital channel signal. You can
select a time zone and turn daylight saving on or off.
To set the clock:
1 Press MENU. The on-screen menu opens.
2 Press or to select Time, then press
menu.
Picture Sound
Sleep Timer
Time Zone
Daylight Saving Time
Clock
Select
3 Press or to select Time Zone, then press or to select a
time zone. You can select Pacific, Alaska, Hawaii, Eastern,
Central, or Mountain.
4 If your viewing area observes daylight saving time, press or
to select Daylight Saving Time, then press
On.
The current date and time appear at the bottom of the option list.
to open the Time
Time Setup Lock Channel
Off
Hawaii
Off
2008/01/15 06:58AM
Move
Exit
MENU
or to select

Displaying the information banner

The information banner displays current status information, such as the
channel number or signal source. In DTV mode, you may also see
additional information.
To display the information banner:
• Press DISPLAY. The information banner opens.

Displaying the program guide

If available, the program guide displays program information, such as
the viewing time, program name, and program description.
To display the program guide:
• Press GUIDE. The program guide opens.

Monitoring the DTV signal strength

You can check the DTV signal strength. The stronger the signal, the less
likely you are to experience picture degradation. If the signal is weak,
you may need to adjust your antenna or digital cable input.
To monitor the DTV signal strength:
1 Press MENU. The on-screen menu opens.
2 Press or to select Channel, then press
Channel menu. The DTV Signal bar appears at the bottom of the
menu.
Picture Sound
Air/Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
Select

Setting up the favorite channel list

To set up the favorite channel list:
1 Press MENU. The on-screen menu opens.
2 Press or to select Channel, then press
Channel menu.
Picture Sound
Air/Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
Select
Using your TV
to open the
Time Setup Lock Channel
Air
2-1
WGBH-SD
Good
:
Move
Exit
MENU
to open the
Time Setup Lock Channel
Air
2-1
WGBH-SD
: Good
Move Exit
MENU