Asus P8H61-I User Manual page 26

6. USB 2.0 connector (10-1 pin USB910, USB1112)
This connector is for a USB 2.0 port. Connect the USB module cable to this connector,
then install the module to a slot opening at the back of the system chassis. This USB
connector complys with USB 2.0 specification that supports up to 480 Mbps connection
speed.
P8H61-I USB2.0 connectors
Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard!
The USB module cable is purchased separately.
7. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
P8H61-I Front panel audio connector
• We recommend that you connect a high-definition front panel audio module to this
• If you want to connect a high-definition front panel audio module to this connector, set
ASUS P8H61-I
USB+5V
USB_P11-
USB_P11+
GND
AAFP
PIN 1
HD-audio-compliant
connector to avail of the motherboard's high-definition audio capability.
the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97
front panel audio module to this connector, set the item to [AC97]. By default, this
connector is set to [HD]. See section 2.5.6 Onboard Devices Configuration for details.
USB1112 USB910
PIN 1 PIN 1
USB+5V
USB+5V
USB_P12-
USB_P9-
USB_P12+
USB_P9+
GND
GND
NC
PIN 1
Legacy AC'97
pin definition compliant definition
USB+5V
USB_P10-
USB_P10+
GND
NC
1-16