Connecting A Component Video Device; Connecting An Hdmi Or Dvi Device; Connecting A Computer - Dynex DX-LCD22-09 User Manual

10

Connecting a component video device

To connect a component video device:
1 Connect a component video cable to the COMPONENT VIDEO
OUT (Y, Cb/Pb, and Cr/Pr) jacks on the component device, then
connect the other end of the cable to the COMPONENT IN jacks
on the back of your TV.
Back of TV
Component video cable
Note: Cables are often
color-coded to connectors.
Connect red to red, white
to white, and so on.
Component video device
2 Connect an RCA audio cable to the AUDIO L and R jacks on the
component video device, then connect the other end of the cable
to the AUDIO L and R jacks on the back of your TV. Make sure that
you connect the audio cable to the audio jacks associated with
the component jacks you connected the component video
cable to.
3 Press INPUT. The Input Source menu opens.
4 Select Component, then press ENTER to confirm. You can also
select component input directly by pressing COMP.

Connecting an HDMI or DVI device

To connect an HDMI or DVI device:
1 Connect one end of an HDMI cable to the HDMI OUT jack on the
HDMI device, then connect the other end of the cable to the
HDMI IN jack on the back of your TV.
When you connect to a DVI device with a HDMI-to-DVI adapter
cable, it transfers only video signal. A separate analog audio cord
is required.
Back of TV
HDMI cable (not provided)
Note: If the external device only has DVI output, use a DVI-to-HDMI
adapter cable to connect to the HDMI jack. If you use this configuration,
you also need to connect an audio cable from the DVI device to the VGA
AUDIO IN jack on the back of the TV.
Audio cables
HDMI device
2 Press INPUT. The Input Source menu opens. Select HDMI, then
press ENTER to confirm. You can also select HDMI input directly
by pressing HDMI.
Connecting a camcorder, game, or VCR
To connect a camcorder, game, or VCR:
1 Connect one end of a video cable to the VIDEO OUT jack on the
camcorder, game, or VCR, then connect the other end to the
VIDEO IN jack on the back of your TV.
Video cable
Note: Cables are often
color-coded to connectors.
Connect red to red, white
to white, and so on.
2 Connect one end of an audio cable to the AUDIO OUT jacks on
the camcorder, camera, or VCR, then the other end of the cable to
AUDIO L/R IN jacks on the back of your TV.
3 Press INPUT. The Input Source menu opens.
4 Select AV to select the input source, then press ENTER to
confirm. You can also select video input directly by pressing
Video.

Connecting a computer

To connect a computer:
1 Connect one end of a VGA cable to the VGA jack on the computer,
then connect the other end of the cable to the VGA IN jack on the
back of your TV.
Back of TV
Mini audio VGA cable
cable
Setting up your TV
Game
Audio cables
Camcorder
Computer