Adding Or Changing A Channel Label - Dynex DX-L37-10A User Manual

Changing channel settings
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Select the signal source of the channel you want to set up on the
favorites list.
4 Press or to highlight Favorite, then press ENTER. The
favorite channel list opens.
5 Press or to highlight the channel you want to add to the
favorite list, then press ENTER to mark the channel. A check
mark appears if the channel is added to the list. The check mark
disappears if you delete the channel from the list.
Note: If the list has more than one page, press
the pages.
6 Press EXIT to close the menu.
7 To select a channel in the favorite channel list, press FAVORITE,
press or to highlight the channel, then press ENTER.

Adding or changing a channel label

If a channel is not already labeled, you can label the channel to make it
easier to identify. You can also relabel a channel that is already labeled.
To label a channel:
or to scroll through
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Select the signal source of the channel you want to label.
4 Highlight Channel No. , then press or to select the channel
you want to label.
5 Press or to highlight Channel Label.
6 Press ENTER to open the Channel Label screen. The Channel Label
screen opens.
7 Press or to select a character, then press or to move to
the next position. Repeat this step to add more characters.
8 Press MENU to exit to the previous menu.
17