Asus P8B-C/4L User Manual page 134

The Create New Volume screen shows the disks you can add to make up
6.
the RAID 1 volume. Use the arrow key to select a disk, then move the cursor
to the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
LSI Corp Config Utility
Create New Volume -- SAS2008
Volume Type:
Volume Size(GB):
Slot Device Identifier
Num
0 ATA
1 ATA
2 ATA
3 ATA
Esc = Exit Menu
SPACE/+/- = Select disk for volume
By default, the RAID Disk field shows No before volume creation. This field is
grayed out under the following conditions:
•
•
•
7. Repeat step 6 to add the second disk to the volume.
When done, press <C> to create the volume, then select Save changes
8.
then exit this menu.
Create and save new volume?
Cancel Exit
Save changes then exit this menu
Discard changes then exit this menu
Exit the Configuration Utility and Reboot
9. The utility creates the volume.
LSI Corp Config Utility
Processing...may take up to 1 minute
Creating RAID Volume...
5-38
ST3160812AS E
ST3160812AS E
ST3160812AS E
ST3160812AS E
F1/Shift+1 = Help
The disk does not meet the minimum requirements for use in a RAID
volume.
The disk is not large enough to mirror existing data on the primary drive.
The disk is already part of another volume.
v7.07.00.00 (2010.04.30)
RAID 1
-------
RAID Drive
Disk Status
[No] ---------- No
[No] ---------- No
[No] ---------- No
[No] ---------- No
C = Create volume
v7.07.00.00 (2010.04.30)
Pred Size
Fail (GB)
149
149
149
149
Chapter 5: RAID configuration