User Password; Secure Boot Policy; Key Management - Asus Z9PA-U8 User Manual

To clear the administrator password, follow the same steps as in changing an
administrator password, but press <Enter> when prompted to create/confirm the
password.

User Password

If you have set a user password, you must enter the user password for accessing
the system.
To set a user password:
Select the User Password item and press <Enter>.
1.
From the Create New Password box, key in a password, then press
2.
<Enter>.
3. Confirm the password when prompted.
To change a user password:
Select the User Password item and press <Enter>.
1.
From the Enter Current Password box, key in the current password, then
2.
press <Enter>.
From the Create New Password box, key in a new password, then press
3.
<Enter>.
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password,
but press <Enter> when prompted to create/confirm the password.
UEFI Secure Boot Management
Secure Boot control [Disabled]
Enables or disables the secure boot flow control.
Configuration options: [Enabled] [Disabled]
The following items appear only when the Secure Boot control is set to Enabled.

Secure Boot Policy

This sub-section contains parameters that allow you to configure the Secure Boot Policy
extended options.

Key Management

This sub-section contains parameters that allow you to configure the Key Management
settings.
4-44 Chapter 4: BIOS setup