Advice And Tips Before You Tumble Dry; Materials That Can Be Tumble Dried; Materials That Should Not Be Tumble Dried; Static Electricity - Asko T794 Operating Instructions Manual

Advice and tips before you tumble dry

Here are some tips that may help you before you
begin tumble drying.
Have the clothes been spun?
Items to be tumble dried should be spun at 1000
rpm or faster. Higher spin speeds save energy
and reduce drying time.

Materials that can be tumble dried

This symbol means that the material is suitable
for tumble drying. Fabrics best suited to tumble
drying are cotton fabrics, terry cloth, and synthetic
fibers. Garments will be softer and lighter when
tumbled than when hung out to dry.
NOTE!
The tumble dryer does not cause any significant
wear on fabrics. The lint trapped in the lint filter
consists of dust and fiber residues formed when
the items are used.
Materials that should not be tumble
dried
This symbol means that the material is not
suitable for tumble drying. Certain materials may
melt or become a fire hazard if exposed to heat
and others can lose their shape or shrink.
And do not tumble dry
• materials labeled "Do not dry near heat".
• garments that have been dry-cleaned at home.
• plastic foam.
• fiberglass material.
• wool must not be tumble dried due to the risk
of piling.
8

Static electricity

To reduce the risk of static electricity in the laundry
after tumble drying, you can:
• Use fabric softener when washing.
• Wait five minutes after the drying program ends
before opening the door and removing the
laundry from the dryer.
NOTE!
You can stop the tumble dryer by pressing the
Stop button for three seconds or by opening the
door. In both cases the program is stopped and
starts from the beginning if restarted.
If you do not want to restart the program,
immediately remove all laundry and spread it out
to allow the heat to dissipate.
Customer Care Center
1-800-898-1879
www.askousa.com