Smart Cards; Rf Pass-Through - Dell Latitude E6420 XFR Setup And Features Information

Document
Hide thumbs Also See for Latitude E6420 XFR:
Table of Contents

Advertisement

4.
Open the computer display and press the power button to turn on the computer.
NOTE: It is recommended that you turn on and shut down your computer at least
once before you install any cards or connect the computer to a docking device or
other external device, such as a printer.

Smart Cards

There are two main types of Smart or Common Access Cards (CAC):
1.
Enclosed Smart Cards (
inserted into a card reader, the information from the chip can be read and written.
The Enclosed Smart Card is accessed through the left front side door above the hard drive.
The Smart Card can be fully inserted, allowing the protective hinged door to be closed. Insert the card into the smart
card slot with the gold contact pad facing upward and pointing toward the smart card slot. Slide the card into the slot
until it is fully seated in its connector.
Pull the smart card from the bottom to remove.
2.
Contactless Smart Cards (
communicates with the card reader through RFID induction technology. These cards require only close proximity to an
antenna of a card reader to complete transactions.
The Contactless Smart Card access is provided to the right of the keyboard touch pad.

RF Pass-Through

In the event the computer has an integrated WiFi and/or Broadband radio, the RF signals can be passed through a docking station
to external TNC antenna connectors (LAN/WAN/GPS). This supports the connection and use of external, vehicle-mounted
antennas (purchased separately) for improved radio performance.
Dell Latitude E6420 XFR Setup and Features Information
) — these cards have a contact area with many gold plated connection pads. When
) — these cards do not require any physical contact with the reader. The chip
Enclosed smart-
card reader
Page 11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents