1
display cable
Replacing the Display Cable
1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the display cable to the display-board connector and secure it
with the tape.
3 Replace the display panel (see "Replacing the Display Panel" on page 47).
4 Replace the display bezel (see "Replacing the Display Bezel" on page 45).
5 Replace the display assembly (see "Replacing the Display Assembly" on
page 43).
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
2
tape
1
2
49
Display