Replacing The Thermal-Cooling Assembly - Dell Inspiron M511R Service Manual

1 captive screws (5)
3 thermal-cooling assembly

Replacing the Thermal-Cooling Assembly

1 Follow the instructions in "Before You Begin" on page 9.
2 Align the screw holes on the thermal-cooling assembly with the screw
holes on the system board.
3 Tighten the five screws that secure the thermal-cooling assembly to the
system board.
4 Connect the fan cable to the connector on the system board.
5 Adhere the tape that secures the fan cable to the system board
6 Follow the instructions from step 4 to step 13 in "Replacing the System
Board" on page 67.
7 Replace the battery (see "Replacing the Battery" on page 16).
76
Thermal-Cooling Assembly
1
2 system board
4 fan cable
3
2
4