Brother HL-1070 - B/W Laser Printer Technical Reference Manual page 434

2001/10/02
Explanation
This operator selects the specified output tray and output mode.
This operator is ignored when no tray is specified.
The '1' and '2' parameters are executed for all output trays other than ones which are defined and protected
as mailboxes.
<Example>
(HL-2060)
This operator is registered in 'statusdict'.
statusdict begin
0 setoutputmode
end
(HL-2460/3260)
<</BROutbinMode 0>> setpagedevice
APPENDIX D REFERENCE LIST OF MX-2000/4000/5000 SERIES UNIQUE COMMANDS - 8