Modem Card - Sharp PCMM20 User Manual

Modem Card

Your computer comes with the modem card. In order to use the modem on your
computer, install the supplied modem card in your computer.
• The modem in your computer is designed only for regular analog
telephone lines. The modem may be damaged when connected to a
digital ISDN terminal or a digital PBX.
• Use TA (terminal adapter) to connect the built-in modem to a digital
telephone line.
• If an unusual device is attached to the line you are connecting to, the
modem may not function properly. Remove the device or contact the
dealer of the device.
• Before connecting to a PBX, consult the PBX maintenance staff or its
service company. If the electric characteristics of your PBX are
different from those of a regular analog line, the modem will not
function properly. If you connect the modem to a digital PBX, both the
modem and the PBX may be damaged.
5
Installing Modem Card
This card is ready for Windows XP. To communicate using the modem card, follow the
instructions below:
1. Gently insert the modem card into the PC card slot. Make sure the card is firmly
seated in the slot.
This modem card is ready to use.
Connecting Modem to Telephone Line
1. Turn off your computer.
2. Connect PC card connector end of the included modem cable to the connector of
the inserted modem card.
3. Connect the modular jack end of the modem cable to the telephone line.
4. Turn on your computer.
Connect the modem to the telephone line directly. Do not use a
distributor or allotter.
5-14