Network Setup Utility - Sharp PCMM20 User Manual

Network Setup Utility

With the Network Setup Utility, you can set up your specific network settings adjusted
for your environments such as work, home, etc. and select the appropriate one to the
environment. You can also change the network settings.
• Not every setting item can be stored.
• The Network Setup Utility may not compliant with all network
environments.
Loading Network Settings
To set your specific network settings, confirm that your computer is connected into the
network and has the proper settings for your current environment and follow the
instructions below.
1. Click start – All Programs – SHARP Network Setup Utility – SHARP Network
Setup Utility.
5
2. Click OK.
3. Click Set, select SHARP icon or Windows icon, then, click Select icon button.
4. Select an icon and click OK. Type a network name, then, click OK. The selected
icon appears in the Network Setup Utility window.
It takes a moment to load the network settings.
Switching Network
To switch the network set above, confirm your computer is ready to connect into the
network and follow the instructions below.
1. Click start – All Programs – SHARP Network Setup Utility – SHARP Network
Setup Utility.
2. Click OK.
3. Select the appropriate network icon in the Network Setup Utility window.
4. Click OK.
• Make sure your computer is connected to the proper environment.
• If your hardware or software configuration has been changed, you may
5-12