Brother ™ QL-710W Quick Setup Manual page 35

For Method 2 users
9-2
Confirm that your WLAN
access point/router has the
WPS symbol.
10-2
Place your printer within
range of your WPS access
point/router. The range may
differ depending on your
environment. Refer to the
instructions provided with
your access point/router.
11-2
Turn on your printer and
press and hold the Wi-Fi
button until the
Fi) indicator starts blinking in
green.
12-2
Press the WPS button on
your WLAN access point/
router. When the
configuration is completed,
the (Wi-Fi) indicator
on your printer lights in
green.
Wireless setup is now
complete. Go on to 16.
16
Choose the printer from the
list, and then click [Next].
17
The installation of the
(Wi-
Brother drivers will
automatically start. The
installation screens appear
one after another.
18
When the screen for the
online user registration is
displayed, click [OK] or
[Cancel].
• If you choose [OK], you will go
• If you choose [Cancel],
• If your wireless settings fail,
the [Wireless Device Setup
Wizard] screen appears.
Follow the on-screen
instructions to complete the
wireless configuration.
• If you are using WEP but
your printer is not found,
make sure you entered the
WEP key correctly.
DO NOT cancel any of the
screens during the installation.
It may take a few seconds for
all screens to appear.
For Windows Vista
®
Windows 7, when the
®
Windows Security screen
appears, click the check box
and click [Install] to complete
the installation.
to the online user registration
page before finishing the
installation (recommended).
installation continues.
27
®
and