Maintenance; Adjustment, Periodic Maintenance, Periodic Replacement Parts, And Replacement Consumables By Service Engineer - Canon iP4200 - PIXMA Photo Printer Service Manual

1. MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and
Replacement Consumables by Service Engineer
(1) Adjustment
Adjustment
Destination At logic board replacement
settings
(EEPROM
settings)
Waste ink - At logic board replacement
counter - At waste ink absorber
resetting
replacement
(EEPROM
settings)
Paper feed At paper feed motor
motor position replacement
adjustment
CD / DVD - At logic board replacement
detection sensor
- At carriage unit replacement
light volume
*1
correction
Grease - At carriage unit replacement
application
- At PR shaft ass'y replacement
- At CL base / gear replacement
Ink system - At logic board replacement
function check
- At platen unit replacement
- At carriage unit replacement
Timing
To set the destination.
To reset the waste ink counter.
To adjust the belt tension.
(Position the paper feed motor so
that the belt is stretched tight.)
To correct the light volume for
the CD / DVD detection sensor.
- To maintain sliding properties
of the carriage shaft and the lift
cam shaft.
- To protect the printer's sliding
portions (gears).
To maintain detection
functionality for presence of the
ink tanks and each ink tank
position.
Purpose
1-1
Approx.
Tool
time
1 min.
None.
Perform in the
service mode.
1 min.
None.
Perform in the
service mode.
None. 5 min.
2 min.
None.
Perform in the
service mode.
FLOIL KG-107A 1 min.
1 min.
None.
Perform in the
service mode.