List Of Error Display / Indication; Operator Call Errors - Canon iP4200 - PIXMA Photo Printer Service Manual

2. LIST OF ERROR DISPLAY / INDICATION

Errors are indicated by the LED, and warnings are displayed on the monitor of the computer connected to the printer.
2-1. Operator Call Errors (by Alarm LED Blinking in Orange)
Alarm
LED
blinking
in orange
No paper. (ASF) [1000]
2 times
No CD / DVD tray. [1001]
No paper in the cassette. [1003]
(No paper in the front paper feed
cassette.)
No CD / DVD. [1002]
Paper jam. [1300]
3 times
Paper jam in the rear guide. [1303]
Paper jam in the under guide.
[1304]
Front door close error. [1250]
4 times No ink. [1600]
Ink tank not installed. [1660]
5 times The print head is not installed
[1401], or it is not properly
installed (Print head temperature
sensor error [1403] / Faulty
EEPROM data of the print head
[1405]).
Error [Error code]
*1
*1
Solution
Set the paper in the ASF, and press the
Resume/Cancel button.
Set the CD / DVD tray, and press the
Resume/Cancel button.
Set the paper in the cassette, and press the
Resume/Cancel button.
Set a CD or DVD in the CD / DVD tray
(which is ejected at error occurrence), and
insert the CD / DVD tray in the proper
position. Then, press the Resume/Cancel
button.
Remove the jammed paper, and press the
Resume/Cancel button.
Open the paper output tray.
Replace the empty ink tank(s), or press the
Resume/Cancel button.
Install the applicable ink tank(s) properly,
and confirm that the LED's of all the ink
tanks light red.
Install the print head properly.
1-5
Remarks
Error in paper
feeding from the
ASF.
Error in the duplex
printing unit.
Error in paper
feeding from the
cassette.
The error is
indicated if the
paper output tray
is closed at start of
a print job, or
while a print job is
being performed.
Pressing the
Resume/Cancel
button will exit the
error without ink
tank replacement,
however, ink may
run out during
printing.