Operating Other Devices; Programming The Remoteto Operateotherdevices; Device Code Setup - Toshiba 32TL515U Owner's Manual

Operating other devices
Your TV remote control has one dedicated TV mode
and three programmable multi-brand modes: CABLE/
SAT, BD/DVD, and AUX.
Note: To operate a non-Toshiba device or a Toshiba
device that the remote control is not preprogrammed to
operate, you must program the remote.
TV Toshiba TV
CABLE/SAT Toshiba Satellite receiver
BD/DVD Toshiba Blu-ray Disc l'_player
AUX Onkyo Receiver
TV Toshiba TV
CABLE/SAT
BD/DVD Multi-brand video/audio devices
AUX
Note: If you cannot program the rV's remote to operate
your device or some of its features, use the device's
remote or the controls on the device.
Programming the remoteto
operateotherdevices
Devicecodesetup
2
3
Find the code for your device brand in the remote
control device code table (_ p. 91-96).
If multiple codes are listed, try each one separately
until you find one that works.
Press a mode select button (CABLE/SAT, BD/DVD,
or AUX). The button blinks 3 times.
While holding down _, input the 4-digit code for
your device.
4
2 blinks Valid code
1 long blink Invalid code
Point the remote at the device. Press PowE_ to test the
code.
The device responds. Valid code
hwalid code
The device does not
Repeat the procedure, using
respond, another code
5
When programming is complete, test all necessary
keys on the TV's remote that operate your device. If
some keys are not operational, repeat the device
code setup using another code (if other codes are
listed for your device).
6 To control the TV, press TV.
7 If your VCR does not respond to the codes for your
VCR brand, and has a switch labeled VCR1/VCR2,
set the switch to the other position, then reprogram
the remote control.
Note: Every time you change the batteries, you must
reprogram the remote.
88