Installing The Current Fibre_Scsi Patch On The Servers; Openvms Fibre_Scsi Patches (As Of October 2006) - HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter Installation Manual

Installing the current Fibre_SCSI patch on the servers

1. Download the current patch from the HP OpenVMS Systems website:
http://h71000.www7.hp.com/serv_support.html.
a. Navigate to the HP Proactive service tools banner.
b. Select one of the following options:
• Register to access the HP Patch Database
• FTP site for OpenVMS patches
c. Follow the onscreen instructions to navigate to and download the patch.
Table 9

OpenVMS Fibre_SCSI patches (as of October 2006)

OpenVMS version
OpenVMS 7.3-2
OpenVMS 8.2 (Alpha)
OpenVMS 8.2 (Itanium)
OpenVMS 8.2- 1 (Itanium)
OpenVMS 8.3 (Alpha)
OpenVMS 8.3 (Itanium)
2. For existing OpenVMS installations:
a. Assign a unique identifier to the MSA controller. For instructions, see the MSA1000/1500
Command Line Interface user guide.
b. On each OpenVMS server, install the Fibre_SCSI patch on all system disks. For instructions,
see the documentation that came with the kit.
3. If you do not have an existing OpenVMS installation:
a. Create at least one LUN on the MSA. For instructions, see the MSA1000/1500 Command
Line Interface user guide.
b. Assign a unique identifier to the MSA controller. For instructions, see the MSA1000/1500
Command Line Interface user guide.
c. Install OpenVMS on the server. For instructions, see your version-specific OpenVMS upgrade
and installation manual.
d. Install the Fibre_SCSI patch on all system disks. For instructions, see the documentation that
came with the kit.
e. Restart the OpenVMS server.
Fibre_SCSI patch
VMS732_FIBRE_SCSI-V0900
VMS82A_FIBRE_SCSI-V0200
VMS82I_FIBRE_SCSI-V0200
VMS821I_FIBRE_SCSI-V0200
No Fibre_SCSI patch available
VMS83I_FIBRE_SCSI-V0100
HP StorageWorks 1000 Modular Smart Array installation guide 79