2.1
Front Panel Components
The front of the DSN-3000 series storage system has the following components:
Power LED – shows the DSN-3000 series power on status. (see Figure 2-1 and Table 2-1)
Boot and Fault LED – shows whether the DSN-3000 series is ready for operation or
encountered a fault condition. (see Figure 2-1 and Table 2-1)
A lock on the bezel that protects access to the drives inside the unit.
The hard drive power and drive activity/fault LEDs. (see Figure 2-1 and Table 2-2)
12
Chapter 2 DSN-3000 series Layout
Figure 2-1 Front View of the DSN-3000 Series Storage System
When installed, the front bezel uses pipes to pass light from the LEDs behind
it to the front for viewing. The bezel itself is passive and has no active LEDs.