Benefits And Features; System Overview - D-Link DSN-3400-10 - xStack Storage Area Network Array Hard Drive Hardware Reference Manual

1.2

Benefits and Features

High-performance, low-latency iSCSI storage system, with a highly integrated, reliable,

multifunction ASIC for fully featured, integrated storage virtualization
Modular design with expansion up to 15 SATA disk drives

Easy setup and configuration – can be placed anywhere on a 10BaseT, 100BaseT, or

Gigabit Ethernet network for improved access to critical information
In-band or out-of-band management via a direct connection or the Web

Delivers Ethernet economics to storage for lower total cost of ownership and rapid

deployment using known and trusted technologies
Proven transport infrastructure for increased reliability, investment protection, and

reduced training costs
Scalability over long distances - ideal for remote data replication and disaster recovery

Three internal fans provide cooling

Battery pack ensures that a charged battery is on hand to preserve buffer cache

contents if a power failure occurs. Contents are backed up for approximately 72 hours.
1.3

System Overview

Figure 1-1 shows a typical DSN-3000 series storage system configuration in a Storage Area
Network (SAN). The SAN shown is an Ethernet network used solely for exchanging data
between the customer's servers and the DSN-3000 series storage system. The Ethernet
bandwidth used by the servers exchanging data with the DSN-3000 series storage system can
be very high. Using a separate Ethernet to act as a SAN keeps that data from interfering with
the customer's existing LAN and improves security.
10 Chapter 1 Introduction
Figure 1-1 DSN-3000 Series Storage System Diagram