Site Considerations; General Considerations; Desktop, Floor Or Shelf Installation - D-Link DSN-1100-10 - xStack Storage Area Network Array Hard Drive Hardware Reference Manual

3.1

Site Considerations

The site where you install the DSN-1100 storage system can affect its performance.
Therefore, choose a site that conforms to the requirements in the following sections.
3.1.1

General Considerations

Observe the following considerations when selecting a location to install the DSN-1100
storage system.
The location should be fairly cool and dry for the acceptable temperature and humidity

ranges.
The location should be free of strong electromagnetic field generators (such as motors),

vibration, dust, and direct exposure to sunlight.
The location must provide sufficient airflow to the front and back of the DSN-1100

storage system for correct cooling. Ventilation must be sufficient to exhaust heat from
the rear of the equipment.
The location should offer a power outlet within six feet (1.82 meters) of the DSN-1100

storage system.
The location should allow for at least six inches (152.3 mm) of space around the DSN-

1100 storage system for ventilation.
Do not place the DSN-1100 storage system next to, on top off, or below any device that

generates a significant amount of heat or will block the fee flow of air through the DSN-
1100 ventilation slots.
3.1.2

Desktop, Floor or Shelf Installation

The DSN-1100 storage system can be placed on a desktop, floor or shelf. Observe the
following considerations for installations.
Select a sturdy, level surface that can support the DSN-1100 storage system. A fully

populated unit weighs approximately 8.8 lbs. (4.0 kg.).
Allow enough ventilation space between the DSN-1100 storage system and any other

objects in the vicinity.
Be sure not to block the air vents on the front and back of the DSN-1100 storage system

enclosure. Install the cables and power cord according to the procedures in the following
sections.
20 Chapter 3 Installing the DSN-1100 Storage System