Resident Use 3; Screen Saver Mode - Elite Entry Phone Dial Code Owner's Manual

USING KEYCODES AND UTILITY CODES
RESIDENT 6-DIGIT KEYCODES
Residents are assigned a 6-digit, personalized key-
code for accessing the facility. To use the keycode
assigned, the resident must first push the
key once and enter their keycode. The screen will
display "Access Granted" (fig a.) and access will be
allowed. If an incorrect keycode is entered, the sys-
tem will inform the user of the invalid entry (fig b.)
The resident can then re-enter their keycode.
EXAMPLE - KEYCODE 002543 =
INDIVIDUAL UTILITY CODES
All systems, no matter what the memory capacity,
are equipped with 60 different Utility codes. To
access the facility within the time zone set, the
Utility Company must first press the
TWICE and then enter their 4-digit code. If it is
within the programmed time zone for entry, the
screen will display "Access Granted" (fig c.) and
access will be allowed. If, however, it is not within
the time zone for entry, the display will inform the
user and access will not be allowed (fig d.)
If the Dial Code System is inactive for 15 seconds it
will go into sleep mode. The screen will continue to
display the scrolling message "Press Any Key"
until a key is pressed. The Screen saver mode is not
available while in program mode.
PAGE
4
RESIDENT USE
EXAMPLE - UTILITY CODE 8716 =

SCREEN SAVER MODE

* ACCESS GRANTED *
Please Enter
* INVALID ENTRY *
Invalid 6-Digit Code
0
* ACCESS GRANTED *
Please Enter
key
* ACCESS DENIED *
Not In Access Period
PRESS ANY KEY
(ACTIVE ENTRY 1 ONLY)
5
0 2
8 7
(fig a.)
(fig b.)
3
4
(fig c.)
(fig d.)
1
6
(fig e.)